HousePlans★ USA ★

Florida · Climate zone 1–2

Custom House Plans in Orlando, FL

Building requirements, permits and zoning in Orlando, plus custom plans drawn to meet them. Customization is free and delivery starts at 24 hours.

Start my Orlando design

House plans we draw in Orlando, FL

Every plan is drawn from scratch for your lot in Orlando, FL, with free customization and 30 days of revisions.

Building requirements

Building a house in Orlando, FL: what the code requires

Statewide residential code

Building code
Florida Building Code – Residential applies statewide and is updated on a regular cycle.
Energy code
Florida Building Code – Energy Conservation applies statewide.
Climate zone
IECC climate zone 1–2. Insulation, windows and HVAC are sized to match.
Typical frost depth
0 in (no frost depth). Footings must extend below the local frost line (confirm with your building department).
Foundations
Raised or pier foundations where flood zones apply; slab inland.
Who can draw the plans
Single-family homes can generally be designed by a non-licensed home designer. A licensed engineer's stamp is often required for structural items, engineered foundations or special hazard zones, or when the local building official asks for it.
Engineer stamp
If your jurisdiction requires sealed drawings, add our Florida Engineer Stamp / Permit-Ready package ($1,500).

Florida-specific rules & hazards

Summary for planning only. Codes, editions and local amendments change, so always confirm current requirements with the building department that will issue your permit. Our designers check your jurisdiction before drawing.

Towns, villages & rural counties

Permit checklist for building in Orlando and surrounding towns

Requirements differ town by town. Use this checklist with your local building, zoning and health departments, and include what you learn in your design instructions. We'll draw to it.

  1. 01Find who issues permitsIncorporated towns and cities usually have a building department. In unincorporated areas it's the county building or planning office, or a state agency, or in some rural areas nobody. Call before you buy the lot.
  2. 02Zoning & setbacksCheck the zoning district for minimum lot size, front, side and rear setbacks, maximum height, lot coverage and whether barndominiums, ADUs or metal buildings are allowed.
  3. 03HOA & deed restrictionsSubdivisions often restrict minimum square footage, exterior materials, roof pitch, garage orientation and outbuildings. These can be stricter than the town code.
  4. 04Septic & well permitsWithout city sewer or water, you'll need a percolation (perc) test and a septic permit from the county health department, plus a well permit.
  5. 05Driveway & culvert permitConnecting to a public road usually needs a driveway or culvert permit from the town, county or state DOT.
  6. 06Floodplain development permitIf any part of the lot is in a FEMA flood zone, you'll need a floodplain permit and an elevation certificate, and the lowest floor must be at or above the Base Flood Elevation plus any local freeboard.
  7. 07Energy code complianceMost jurisdictions require an energy compliance report (REScheck or similar) showing insulation, windows and HVAC meet the adopted energy code.
  8. 08Engineering stampMany building officials require a licensed engineer's seal for foundations, beams, trusses, or high wind, snow or seismic zones. Add our Engineer Stamp option at checkout.
  9. 09Utility & fire accessRural lots may need a fire-apparatus access road, a water supply for firefighting, or wildfire (WUI) defensible-space and ignition-resistant materials.
  10. 10Inspections scheduleA typical sequence is footing, foundation, framing, rough MEP, insulation and final. A certificate of occupancy is issued after final inspection.

Popular styles around Orlando

Coastal & Beach house exteriorFrom $1,300

Coastal & Beach Plans in Florida

Raised foundations, big porches and breezy layouts built for wind and water.

Mediterranean house exteriorFrom $1,595

Mediterranean Plans in Florida

Stucco walls, clay tile roofs, arches and shaded courtyards.

Modern house exteriorFrom $1,300

Modern Plans in Florida

Clean lines, flat or shed roofs, floor-to-ceiling glass and indoor-outdoor living.

Orlando and Florida house plan guides

House plans for sale around Orlando

Orlando building FAQ

Do I need a building permit to build a house in Orlando?+

Yes. New homes in Orlando require a building permit from the local building department (city, or county if the lot is unincorporated). Expect to submit a full plan set, a site plan, energy compliance and, where required, sealed engineering.

What building code applies in Orlando, FL?+

Florida Building Code – Residential applies statewide and is updated on a regular cycle. Check whether Orlando has local amendments before you submit.

How much do custom house plans cost in Orlando?+

Plans start at $1,050 for homes up to 1,000 sq ft and are priced by size, with free customization and 30 days of revisions. Engineer stamps for Florida start at $1,500.

Let's design your Orlando home

It takes about 10 minutes, and we save your answers as you go.

Get my free quoteSee pricing