HousePlans★ USA ★

North Carolina · Climate zone 3–5

Custom House Plans in Cary, NC

Building requirements, permits and zoning in Cary, plus custom plans drawn to meet them. Customization is free and delivery starts at 24 hours.

Start my Cary design

Where to get your Cary building permit

Town of Cary Inspections & Permits

Floodplain, stream buffer and erosion control approvals may be needed on top of the building permit.

Checked November 2026. Offices and rules change, so confirm with the office before you apply.

House plans we draw in Cary, NC

Every plan is drawn from scratch for your lot in Cary, NC, with free customization and 30 days of revisions.

Building requirements

Building a house in Cary, NC: what the code requires

Statewide residential code

Building code
The North Carolina Residential Code (the state's own IRC-based code) applies statewide.
Energy code
The North Carolina Energy Conservation Code applies statewide.
Climate zone
IECC climate zone 3–5. Insulation, windows and HVAC are sized to match.
Typical frost depth
12–18 in (Piedmont/coast), 18–24 in (mountains). Footings must extend below the local frost line (confirm with your building department).
Foundations
Raised or pier foundations where flood zones apply; slab inland.
Who can draw the plans
Single-family homes can generally be designed by a non-licensed home designer. A licensed engineer's stamp is often required for structural items, engineered foundations or special hazard zones, or when the local building official asks for it.
Engineer stamp
If your jurisdiction requires sealed drawings, add our North Carolina Engineer Stamp / Permit-Ready package ($1,000).

North Carolina-specific rules & hazards

Summary for planning only. Codes, editions and local amendments change, so always confirm current requirements with the building department that will issue your permit. Our designers check your jurisdiction before drawing.

Towns, villages & rural counties

Permit checklist for building in Cary and surrounding towns

Requirements differ town by town. Use this checklist with your local building, zoning and health departments, and include what you learn in your design instructions. We'll draw to it.

  1. 01Find who issues permitsIncorporated towns and cities usually have a building department. In unincorporated areas it's the county building or planning office, or a state agency, or in some rural areas nobody. Call before you buy the lot.
  2. 02Zoning & setbacksCheck the zoning district for minimum lot size, front, side and rear setbacks, maximum height, lot coverage and whether barndominiums, ADUs or metal buildings are allowed.
  3. 03HOA & deed restrictionsSubdivisions often restrict minimum square footage, exterior materials, roof pitch, garage orientation and outbuildings. These can be stricter than the town code.
  4. 04Septic & well permitsWithout city sewer or water, you'll need a percolation (perc) test and a septic permit from the county health department, plus a well permit.
  5. 05Driveway & culvert permitConnecting to a public road usually needs a driveway or culvert permit from the town, county or state DOT.
  6. 06Floodplain development permitIf any part of the lot is in a FEMA flood zone, you'll need a floodplain permit and an elevation certificate, and the lowest floor must be at or above the Base Flood Elevation plus any local freeboard.
  7. 07Energy code complianceMost jurisdictions require an energy compliance report (REScheck or similar) showing insulation, windows and HVAC meet the adopted energy code.
  8. 08Engineering stampMany building officials require a licensed engineer's seal for foundations, beams, trusses, or high wind, snow or seismic zones. Add our Engineer Stamp option at checkout.
  9. 09Utility & fire accessRural lots may need a fire-apparatus access road, a water supply for firefighting, or wildfire (WUI) defensible-space and ignition-resistant materials.
  10. 10Inspections scheduleA typical sequence is footing, foundation, framing, rough MEP, insulation and final. A certificate of occupancy is issued after final inspection.

Popular styles around Cary

Modern Farmhouse house exteriorFrom $1,300

Modern Farmhouse Plans in North Carolina

Board-and-batten siding, black windows, metal roof accents and a deep front porch.

Craftsman house exteriorFrom $1,250

Craftsman Plans in North Carolina

Tapered columns, exposed rafter tails, stone bases and handcrafted detail.

Coastal & Beach house exteriorFrom $1,300

Coastal & Beach Plans in North Carolina

Raised foundations, big porches and breezy layouts built for wind and water.

Cary and North Carolina house plan guides

House plans for sale around Cary

Cary building FAQ

Do I need a building permit to build a house in Cary?+

Yes. New homes in Cary require a building permit. Start with Town of Cary Inspections & Permits. Expect to submit a full plan set, a site plan, energy compliance and, where required, sealed engineering.

What building code applies in Cary, NC?+

The North Carolina Residential Code (the state's own IRC-based code) applies statewide. Check whether Cary has local amendments before you submit.

How much do custom house plans cost in Cary?+

Plans start at $1,050 for homes up to 1,000 sq ft and are priced by size, with free customization and 30 days of revisions. Engineer stamps for North Carolina start at $1,000.

Let's design your Cary home

It takes about 10 minutes, and we save your answers as you go.

Get my free quoteSee pricing